AUtec Modular Serie Manual De Usuario página 19

!
It should be remembered that in some countries must be respected
rules which control:
- the use and/or possession of a radio remote control;
- the use of operational frequencies which have not yet been harmo-
nised in Europe.
All the indications that must be observed can be found in the "Limi-
tations & Authorizations" document, which is included in the prod-
uct's documentation.
As required by the Machines Directive and relative harmonised standards, all ma-
chines must undergo a risk analysis; therefore it is necessary to evaluate, within the
limits of this analysis, if the machine can be radio remote controlled.
The machine producer and/or the person who decides upon radio remote control use
and installation is responsible for this analysis.
Autec cannot be held responsible if the risk analysis is not carried out correctly.
To guarantee correct radio remote control operation, all current regulations regarding
safety at work and accident prevention should be respected. All current user country
national laws regarding the use of both the machine and the radio remote control
MUST ALWAYS be respected.
Autec cannot be held responsible if the radio remote control is used in unlawful
working conditions.
!
In any cases of emergencies, faults or damaged parts, ALWAYS stop
the "machine + radio remote control" system until the problem has
been solved.
Any damaged parts can ONLY be replaced by authorised Autec person-
nel, and only using original Autec spare parts.
LIMJNMU0
LIMITATIONS & AUTHORIZATIONS
2 - Introduction Page 17 of 71