Before Using; After Use; Warnings For Maintenance - AUtec Modular Serie Manual De Usuario

5 WARNINGS FOR MAINTENANCE

!
ENSURE THAT THE BATTERY HAS BEEN RE-
MOVED FROM THE TRANSMITTING UNIT BE-
FORE CARRYING OUT ANY MAINTENANCE
WORK.
Any faults should be repaired by authorised Au-
tec personnel using original Autec spare parts
only.
No particular maintenance needs to be carried out on the transmitting unit, but the fol-
lowing should be done in order to always keep it reliable and safe:

BEFORE USING:

- make sure that the unit is integral,
- make sure that the gaskets, bellows and the actuator hoods (joystick, selectors and
pushbuttons) are whole, soft and elastic, and that the symbols on the panel can be
seen clearly.

AFTER USE:

- always store the unit in a clean dry place,
- make sure that the battery seat is and contacts are clean,
- remove dust or any other material that has deposited on the transmitting unit with a
cloth that has been dampened with water (never use solvents or flammable/corrosive
materials to clean, and do not use high pressure water cleaners or stream cleaners).
When it is necessary to carry out special maintenance (radio remote control repair and
replacement of damaged or faulty parts), do not contact anyone other than our Assist-
ance Service. In order to make the intervention faster and more reliable, please help
us identify the radio remote control correctly and completely by giving:
- the serial number
- the purchase date (given on the guarantee)
- description of the problem found
- the address and telephone number of the place where the radio remote control is be-
ing used
- the name of the person to be contacted
- the name of the company that supplied the radio remote control.
Before calling the Assistance technicians, it is advisable to make sure that the
given instructions have been followed correctly.
When scrapping, entrust the radio remote control to the separate scrap collecting serv-
ices in the user country.
Page 22 of 71
SERVICE
SCRAPPING
5 - Warnings for maintenance LIMJNMU0