Folding the Tent
• Remove all items from inside the tent and close all the zippers. The cover sheet can stay attached
inside the tent.
• Keep the product on a flat surface.
• Unzip the pouch at the bottom of the tent. Remove the mattress and pull out the safety band.
• Grab the top of the frame in the middle on both sides. (15)
• Bring the bottom of the frame up to the top and pinch the whole frame together in the middle. (16,
17, 18)
• Keep the folded tent upright. With one hand, grab the middle part, and with the other hand, push
the top down to the bottom. (19)
• Push the top down/inside continuously until the frame forms three circles. (20)
• The top and inside part should be grabbed by one hand while still holding onto the middle part
with the other hand (loosely) to enable the two top circles to cross each other. (21)
• Cross the two top circles more and make one circle cover the other. (22) Make sure that the part
with the safety band always ends up on top. (23)
• The frame should now form three circles on top of each other. It can now be fastened using the
safety band and stored in the bag.
• Open the valve on the mattress and begin folding to push all the air out. (24) Close the valve to
keep the mattress from self-inflating.
• The folded mattress can be stored in the bag for carrying. (25, 26)
I WARNING:
before folding. After each use, deflate the mattress, fold and store in the
bag along with the tent and sheet. After many folds, the tent might lose
some of its shape. Reshaping the frame might be necessary from time to
time.
15
17
10
Please read the folding instruction carefully
16
18