Bestron ABM2003 Manual Del Usuario página 49

user's instructions
15. Program menu
16. Display
17. Weight selection-button
18. Timer-buttons
19. Crust colour-button
20. Start-stop-button
use - display and functions, control panel
Display:
• shows the selected color of the crust
• shows the weight of the bead
• shows the selected program number
• shows the remaining time
• shows the temperature warning (see the Troubleshooting section).
Program menu button (15):
Timer buttons (18):
Crust color button (19):
Start/Stop button (19):
use - Programs
1. base (White or brown bread) (2:55)
For white and brown bread. Also for bread containing herbs and raisins.
2. french bread (3:40)
For light and crusty bread such as, for example, French bread. This bread needs to rise for a longer
period of time, and consequently the preparation time is longer than for other programs.
3. sweet bread (2:55)
For sweet breads with a crisper crust. The crispy crust is obtained by heating the dough containing
sugar to a higher temperature.
4. cake (1:40)
Suitable for cakes where baking powder is used instead of yeast.
5. Wholemeal bread (3:32)
For wholemeal bread containing a high proportion of wholemeal flour.This program uses a longer
preheating time. This offers extra time for the dough to absorb water, and for the dough to rise.
The kneader blade is stationary during this 15-minute resting time. The use of a delayed start is not
recommended when baking wholemeal bread; this can yield a poorer result.
6. sandwich (3:00)
Suitable for baking sandwich bread. The bread has a light structure and a thin crust.
7. Kneading (0:10)
This program is used just for kneading.
8. Jam, marmelade (1:20)
Suitable for preparing jam, marmalade. During preparation, make sure the baking-tin is only two thirds
full of all the ingredients (approx. 1000g), since the mixture may tend to foam up.
Figure 2
Operating panel
used to select the program from the menu.
used to delay the baking process (setting for the programs basic, french,
whole wheat, sweet and quick).
used to select the required colour of the crust (light, dark).
Press the Start button. A beep will be heard, and the colon in the display
begins to flash; the program has started. Press the Stop button for at least
3 seconds. A beep will be heard, and the colon in the display stops flashing.
37
16.
450g 680g 900g
15. 17.
18.
19. 20.