Getting To Know The Appliance; Control Panel; Operating The Appliance; Setting The Fan - NEFF D99L20N0 Instrucciones De Uso

Getting to know the appliance

Explanation
1 Flue
2 Lighting
3

Control panel

4 Metal mesh grease filter

Operating the appliance

Note: Switch on the extractor hood when you start cooking and
switch it off again several minutes after you have finished
cooking. This is the most effective way of removing the kitchen
fumes.

Setting the fan

Note: Always adjust the fan strength to meet current conditions.
If there is a large build-up of steam or fumes, select a high fan
setting.
Switching on
#
Press the button.
■
The fan starts at setting 2.
Press the + or - button to change the fan strength.
■
Switching off
#
Press the button.

Intensive setting

You can use the intensive setting if there is a large build-up of
odours and fumes/vapours.
There are two different intensive settings available:
˜‚
- duration: 5 minutes
˜ƒ
- duration: 10 minutes
Control panel





Explanation
1 Fan On/Off
2 Fan on, turn fan up
3 Display panel
4 Turn the fan down
5

Fan run-on time

6 Switch on lighting
Press the + button while the appliance is at ventilation setting „
■
.
The intensive setting
Press the + button again to activate the intensive setting
■
Once the preset time has elapsed, the electronics automatically
switch the appliance back down to ventilation setting
wish to end the intensive setting before the preset time expires,
press the - button until the required setting is reached.
Fan run-on time
Press the
«
%
and
The run-on time is six minutes. Once this time has elapsed,
ventilation switches off automatically. If the lighting is switched
on, it remains on.
Setting the run-on time
During the fan run-on time, press the + or - buttons.
You can set the following run-on times:
¬
Display : three minutes
«
Display : six minutes
ª
Display : nine minutes






˜‚
is activated.
$
button.
appear in the display.
˜ƒ
.
ƒ
. If you
13