Assembling The Trap - Biogents Mosquitaire Manual De Instrucciones

Contents included in the Packaging
1. Intake funnel
2. Funnel net
3. Catch bag (2x)
Preassembled Body
4. Trap body
5. Bottom part of lid
6. Top part of lid
7. Gauze covering
8. Inner tube with ventilator
9. Power cord with transformer
10. BiogentsSweetscent™

Assembling the trap

1. Open the BiogentsSweetscent™ package (10) and
remove the white Sweetscent™ envelope. [B1] Place the
Sweetscent™ into the black pouch located on the inside
wall of the inner tube (8). [B2]
2. Place the funnel net (2) around the bottom of the intake
funnel (1). [B3] Then place the catch bag (3) over the fun-
nel net (2). Tighten the top part of the catch bag (3) about
2cm below the top of the funnel net (2). [B4]
3. Insert the intake funnel with the attached funnel net and
catch bag [B4] into the opening on top of the lid. [B5]
4. Plug the power transformer (9) into a water safe outlet.
[B6]
6 7 8
B1
1
2
B3
B5
1
2
3
5
4
9
10
B2
1
2
3
B4
B6
EN 3