Hella Rallye 3000 Instrucciones De Montaje página 21

GB ENGLISH
Install the relay with the
connection terminals
facing downwards and
protected against splashing.
If required and permitted by
legal regulations, install a
switch on the dashboard.
Route and connect the
cables according to the
Have the driving lamps set
by a specialist garage or
at a service station.
Another tip:
• Always keep headlamp
lenses clean. Dirt can
swallow up to 80% of
light power. You drive
safely when you can
see and be seen well.
Do you carry spare
21
Electrical connection: Rallye 3003: Page 8/9
circuit diagram. When
wired according to circuit
diagram I the auxiliary
lamps are switched on
together with the existing
driving lamps. According
to circuit diagram II the
auxiliary lamps are switched
on addition to the existing
Only correctly set
headlamps ensure
optimum light.
bulbs and fuses in
your vehicle?
• Correctly re-install all
the removed parts.
If you have any
questions or installation
problems, please call
the Hella Service,
headlamps via a separate
switch. According to circuit
diagram III the CELIS®
position lamps are
connected and switched
on together with the
parking light. Fasten the
supply cables securely in
place.
wholesealer,or return
to your garage.
• Outside normal working
hours, an answering
machine will record your
inquiries and requests
and Customer Services
will then get back to you.
Ask your dealer for
the complete Hella
brochure or write to:
Hella KGaA
Hueck & Co.
59552 Lippstadt/
Germany