Installer Settings; Menu 01 - Chrono Setting - Ferroli NATURFIRE EVO 27 Instrucciones De Uso, Instalación Y Mantenimiento

Menu 03
USER SETTINGS
Menu 04
BOILER STATUS
Menu 05
TECHNICIAN
SETTINGS
Menu 06
INSTALLER
SETTINGS

6.2.1. MENU 01 - CHRONO SETTING

Allows all chronothermostat functions to be enabled/
disabled; select ON to activate the function and display
the relevant segment/LED (D).
When Daily, Weekly or Week End programming is
entered, the appropriate segment/LED (C) appears in the
top right of the display.
By accessing the submenu: DAY PROGRAM, the daily
chronothermostat functions can be enabled/disabled and set.
It is possible to set two operation stages delimited by the
times set according to the following table where the setting
OFF tells the clock to ignore the command.
Selection
START 1 Activation time
STOP 1 Deactivation time
START 2 Activation time
STOP 2 Deactivation time
By accessing the submenu: WEEK PROGRAM it is possible to
enable/disable and set the weekly chronothermostat functions.
The weekly programmer has 4 independent programs whose
final effect consists of a combination of the 4 programmings.
The weekly programmer can be activated or deactivated;
also, by setting OFF in the time field, the clock ignores the
corresponding command.
74
M-3-1 Language
M-3-3 Buzzer mode
M-3-4 Lighting
M-3-6 Heating Delta
Storage tank-
M-3-7
Puffer Delta
M-3-8 Pellet level
M-3-9 DHW control
Meaning
cod.48427M013_11/19
NATURFIRE EVO 27 - 34
Menu for technician
Menu for technician
Menu for technician
C
Input
Possible values
Input
--
ON/OFF
0 - 100
0.5 - 20°C
0.5 - 20°C
ON/OFF
ON/OFF/EST
D
Menu level
time - OFF
time - OFF
time - OFF
time - OFF
EN