Removing The Packing - Ferroli NATURFIRE EVO 27 Instrucciones De Uso, Instalación Y Mantenimiento

Step
Insert the forklift forks in the seats of the
1
wooden cage.
Slowly lift, ensuring the machine is properly
2
balanced.
Place it in the required location, making sure it
3
is in accordance with the requirements.
The forklift forks must be long enough to withstand the weight of the machine.
Make sure lifting equipment that is suitable for the weight to be lifted is used.

5.2.2. REMOVING THE PACKING

Use suitable equipment to remove the boards or wooden parts of the boiler
packing.
Follow the operations below to remove the packing:
Step Action
1 Remove the cover and the 4 side panels from the cage.
2 Unscrew the 4 screws holding the base to the bottom of the packing.
Remove the boiler from the pallet and follow the operations described in the
3
"Positioning" paragraph.
1
Disposal or recycling of the packing must be done by the end user, in
compliance with local regulations on waste and keeping it out of the reach
of children or disabled persons.
62
Action
cod.48427M013_11/19
NATURFIRE EVO 27 - 34
Image
2
EN