SEVERIN MW7848 Instrucciones De Uso página 23

Ocultar thumbs Ver también para MW7848:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 56
after one side is sufficiently browned, and taken out once it is done on both sides, this
process should be closely monitored.
Example: programming the grill function for 30 minutes.
1. Press
2. Press
to confirm the grill function.
3. Turn the rotary control until the display shows 30:00.
4. Press
to start the grill process. The symbol
Note:
Halfway through the programmed grilling time, a double-beep is heard and the
programme automatically stops; this allows you to turn the food to be grilled. Open the
door, turn the food, then close the door again and press
Combination functions
When using the combination functions, the microwave, hot/air and grill functions are
activated alternately at different time settings. Using the various combinations helps to
reduce the overall cooking time. These programmes are useful for fish, potatoes, soufflés or
cooking 'au gratin'.
Function
Combi 1
Combi 2
Combi 3
Combi 4
1. Press
2. "C-1", "C-2", "C-3" or "C-4" are flashing in the display, in addition, the
corresponding symbols (
3. Press
to confirm the selected combination function.
4. Turn the rotary control to select the cooking time.
5. Press
to start the cooking process. The corresponding symbol for the selected
function flashes on the display.
The hot-air function
With this function, hot air circulates inside the oven, achieving an even cooking and
browning process. By pressing the
of 150°C and 240°C. The cooking time can be pre-set to a maximum of 95 minutes.
If required, the appliance may also be pre-heated. Select the desired temperature level and
press
twice.
Example: the appliance is to be pre-heated to 200°C, followed by a cooking time of 30
minutes.
1. Press
6 times. 200°C starts flashing on the display, and the symbol
2. Press
to confirm the temperature setting.
3. Press
to start the pre-heating process.
4. The symbol
in progress.
once. 'G-1' is flashing in the display, and the symbol
Display
C-1
C-2
C-3
C-4
repeatedly until the desired combination function is shown.
,
and the illuminated indicator bar start flashing while pre-heating is
Microwave
,
) are shown.
key, the cooking temperature can be set within a range
23
is shown.
starts flashing in the display.
to continue the programme.
Hot air
Grill
appears.

Publicidad

Tabla de contenido
loading

Tabla de contenido