Philips AVENT SCD510 Manual De Instrucciones página 14

EngliSh
14
Default settings
Parent unit
- Loudspeaker volume: 1
- Microphone sensitivity: 3
Baby unit
- Loudspeaker volume: medium
- Nightlight: off
accessories
Belt clip
If the battery pack of the parent unit is sufficiently charged, you can take the unit with you inside and
outside the house if you attach the unit to your belt with the belt clip. This allows you to monitor
your baby while you are moving around.
Connecting the belt clip
1 Snap the belt clip onto the parent unit (Fig. 28).
Disconnecting the belt clip
1 Pull the belt clip off the parent unit.
Cleaning and maintenance
Do not immerse the parent unit or the baby unit in water and do not clean them under the tap.
Do not use cleaning spray or liquid cleaners.
1 Unplug the baby unit or the parent unit if they are connected to a power outlet.
2 Clean the parent unit and the baby unit with a damp cloth.
Make sure the units are dry before you connect them to a power outlet.
3 Clean the adapters with a dry cloth.
This appliance has no other user-serviceable parts. For assistance call 1-800-54-AVENT
(1-800-542-8368).
Storage
- When you are not going to use the baby monitor for some time, remove the non-rechargeable
batteries from the baby unit and the rechargeable battery pack from the parent unit. Store the
parent unit, the baby unit and the adapters in a cool and dry place.
- Do not wrap cords around the monitor when storing. Store cords in a safe location where they
will not be cut or damaged.
replacement
Baby unit
Batteries
Only replace the non-rechargeable batteries of the baby unit with four 1.5V R6 AA batteries.
Note: We recommend you to use Philips LR6 powerLife batteries or an equivalent type.
adapter
Only replace the adapter of the baby unit with an adapter of the original type. For assistance visit
our website www.philips.com/AVENT or call 1-800-54-AVENT (1-800-542-8368).