Tuner Operation - Jensen HD5313 Manual De Instrucciones Y Operación

Ocultar thumbs Ver también para HD5313:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

HD5313

Tuner Operation

Press the SRC button (2) to switch to HD RADIO mode.
About HD Radio™ Technology
HD Radio technology allows CD-quality digital broadcasting of your local
AM and FM radio stations. HD Radio broadcasts can include multiple
channels on the same frequency, which is called multicasting. With
multicasting, you can receive up to three additional multicast channels:
HD2, HD3, HD4. With your HD5313 radio, you will receive HD Radio digital
broadcasts automatically when tuned to a station that offers HD Radio
technology.
Select a Band
Press the BAND button (3) to change between three FM bands and two AM
band. Each band stores up to six preset stations.
1
4
7
11
10
HD5313
3
6
23
2
13
14
Tuning
When tuning to an HD Radio channel, "LINKING" may appear on the LCD
while the initial digital information is received. Once linked, "Hd1" appears in
the bottom center of the LCD.
NOTE: Not all FM or AM stations offer HD Radio (digital) broadcasting.
You will receive both analog and digital stations with the HD5313.
20
21
19
5
8
9
15
16
17
18
12
22
22
Manual Tuning
Press the >>| (10) or |<< (11) button for more than three seconds to enter
manual tuning mode, then press the >>| or |<< buttons to move the radio
frequency number up or down one step.
Auto Seek Tuning
Press the >>| (10) or |<< (11) button to automatically seek the next station.
HD Radio Multicast Channels
To tune to an HD Radio multicast channel, tune to the main signal and then
press the PGM button (19). If a subchannel is available, the corresponding
multicasting number appears in the bottom left corner of the LCD.
Analog/Digital Reception
Press and hold the PGM button to change between "Auto", "Digital" and
"Analog". When set to "AUTO", the station will first be received in Analog
but will change to Digital when a digital signal is detected and the HD icon
will illuminate. If the digital signal becomes unavailable, the unit will revert to
Analog reception. In "Auto" or "Digital" mode, the HD icon flashes until a
digital signal is received, and remains lit during digital HD Radio reception.
NOTE: Digital signals are not as strong as traditional analog signals.
When tuned to a digital HD Radio station, the signal may begin to fade
in rural areas. In this case, switching to analog tuning will eliminate
signal fading issues. However, you will not receive digital or HD Radio
Multicast stations in analog mode.
5

Publicidad

Tabla de contenido
loading

Tabla de contenido