Sportplus SP-MR-011 Manual De Instrucciones página 43

Target value function for:
TIME,
A
DISTANCE, STROKES,
CALORIES,
PULSE
B
Continuous measurement
Simulate a race against the
computer with 15 difficulty
levels.
Race simulation difficulty level (time / countdown)
L1 L2 L3 L4
8:00 7:30 7:00 6:30
AM AM AM AM
MANUAL mode
The time target value flashes.
• Press the ENTER button to switch to the next
function.
• Press the UP button to set the target value for:
TIME, DISTANCE, STROKES, CALORIES or
PULSE.
• Press the ENTER button to confirm the setting.
• Press the button START button to begin.
• After the target value is reached or when you
press the STOP button, the average value is
shown on the display.
• During training, the computer continuously
measures the values for: TIME, DISTANCE,
STROKES, CALORIES or PULSE.
• Press the button START button to begin.
RACE mode
L9 flashes on the display.
• The TIME/500m display shows 4:00.
• Press the UP or DOWN buttons to set the
difficulty level (L1-L15).
• Press the ENTER button to confirm the setting.
• The race distance flashes on the display.
• Press the UP or DOWN buttons to set the
distance
• Press the ENTER button to confirm the setting.
• Press the button START button to begin.
• The display shows the race simulation for
"USER" and "PC".
• The race display stops when either you or the
computer reaches the set race distance.
• The display then shows either "PC WIN" or
"USER WIN".
L5 L6 L7 L8
6:00 5:30 5:00 4:30
AM AM AM AM
43
(500-10000 m).
L9 L10 L11 L12
4:00 3:30 3:00 2:30
AM AM AM AM
L13 L14 L15
2:00 1:30 1:00
AM AM AM