RECOVERY mode
1. The computer has an integrated receiver for a heart rate transmitter that is suitable
for nearly all common 5.3 kHz chest straps (chest strap not included).
2. Continue wearing the chest strap after training and press the RECOVERY button.
3. The display shows a countdown
4. After the countdown runs down, the display shows a status: F1, F2, ... to F6.
5.
F1
is "excellent",
6. Press the RECOVERY button again to return to the main display.
Important notes:
1. The computer activates automatically when you begin training or press a button.
2. After
4
minutes, the computer automatically switches to standby mode when no
signal is received.
3. The alarm only works in standby mode. The alarm does not sound during training.
Press and hold the RESET button to activate the alarm.
4. If the computer displays no or only a partial image, replace the batteries.
5. The computer is powered by
00:60
F6
is "poor".
2
AA batteries.
to 00:00.
44