Intended Use; About This Document; Warning Notices - GF EA 04 Manual Instrucciones

Intended use

1 Intended use
The electrical actuators EA 04 are designed for assembly on a valve and for
connection on a control device. The electrical actuators EA 04 are designed to activate
ball valves, with pivot movements of up to 180°.
The product is not intended for any types of use other than those described here.
Failure to follow the instructions in this manual shall lead to the termination of the
manufacturer's liability for the above mentioned products.

2 About this document

This document contains all necessary information for the installation, operation and
service of the product.

2.1 Warning notices

This instruction manual contains warning notices that shall prevent you from death,
injuries or material damages. Always read and observe these warning notices!
Warning symbol
CAUTION
WARNING
WARNING
CAUTION
26
Meaning
Imminent danger!
Failure to observe these warnings could result in death or very
serious injuries.
 Measurements to avoid the danger.
Possible imminent danger!
Failure to observe these warnings could result in very serious
injuries.
 Measurements to avoid the danger.
Dangerous situation!
Failure to observe these warnings could result in small
injuries.
 Measurements to avoid the danger.
Dangerous situation!
Failure to observe these warnings could result in material
damages.
 Measurements to avoid the danger.
Electrical actuator type EA04