Helpful Hints; Troubleshooting - Easy Home VC9389 Manual Del Usuario

Ocultar thumbs Ver también para VC9389:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Helpful hints

Use a steady, moderate forward motion.
Always work from back to front across a room to avoid stepping on wet
carpet.
Do not make the carpet too wet. Use no more than 2 sets of forward and
backward strokes while releasing solution.
Wipe any cleaning solution from woodwork and wood to prevent damage.
Allow plenty of time for carpet to dry completely.
NOTE: An automatic shut-off device prevents the carpet cleaner from picking up
more dirty water than the dirty water tank can hold. You will know the dirty water
tank needs to be emptied when:
The motor sound rises in pitch
You do not see dirty solution coming up through the dirty water tank

Troubleshooting

Problem
Carpet Cleaner won't run
Not enough suction during floor
cleaning
Cleaning solution won't dispense
Solution
-Make sure it is plugged in
-Check the fuse or breaker
-Empty the dirty water tank; it may be
full and the automatic shut-off has
engaged
-Make sure the dirty water tank is
properly installed
-Make sure the clean water tank in fully
inserted and properly installed
-Refill the clean water tank if it is empty
Helpful hints
11

Publicidad

Capítulos

Tabla de contenido

Solución de problemas

loading

Productos relacionados para Easy Home VC9389

Tabla de contenido