To Select The Source; To Edit The Input Source Name - Samsung HL-T5656W Instrucciones Del Propietario

To Select
the Source
Use to select TV or other external input sources such as DVD players, VCRs, etc, connected to the TV.
1 Pressthe MENU button.
Press the 4 or 1_button to select input, then press the ENTER button.
Press the A or T button to select Source List, then press the ENTER button.
Press the A or T button to select a signal source, then press the ENTER button.
You can choose between the following sets of jacks: TV, AVl, AV2, S-Video1,
S=Video2, Component1, Component2, PC, HDM!I, or HDMI2/DVI on the TV's rear
panel and AV3 or S-Video3 on the TV's side panel.
> HDMII or HDM!2/DVl input can only be selected when the external device is turned
on and connected via HDMI.
You can choose only those external devices that are connected to the TV.
[_ Press the SOURCE button on the remote control to view an external signal source.
[ ....
To Edit the input Source Name
Name the external device connected to the input jacks to make your input source selection easier,
1 Pressthe MENU button.
Press the 4 or _. button to select Input, then press the ENTER button.
Press the A or T button to select Edit Name, then press the ENTER button.
Press the A or T button to select AV1, AV2, AV3, S=Videol, S-Video2, S=Video3,
Component1, Component2, PC, NDMII, or HDMI2/DVl input jack, then press the ENTER
button.
Press the _t, or T button to select VCR, DVD, D=VH8, Cable STB, HD STB, Satellite STB,
PVR STB, AV Receiver, DVD Receiver, Game, Camcorder, DVD Combo, DVD HDD
Recorder, PC, Internet TV Recv., interactive TV Recv., VOD STB, or TV input source,
then press the ENTER button.
Press the EXIT button to exit.