Pneumatic Connection; Figure 2: Pneumatic Diagram For The Kenova Set Line V224 - KELCH KENOVA set line V224 Manual De Instrucciones

3 Initial Operation
3.4

Pneumatic Connection


Attach the pneumatic connection to the compressed air supply (4-6 bar pre-cleaned,
hose connection LC6 with hose clamp)

Set the operating pressure to min. 4 bar.
Possible dysfunction at inappropriate use
The maintenance unit with a filter and pressure regulator valve is included in the
delivery. Do not add oil!
Figure 2: Pneumatic diagram for the KENOVA set Line V224
KENOVA set Line V224  Kelch GmbH 2013
Kelch GmbH • Werkstraße 30 • D-71384 Weinstadt-Endersbach • Tel. (+49)7151 20522 0 • Fax (+49)7151 20522 11 • info@kelchgmbh.de
Seite 13