Maintenance And Service; Cleaning - KELCH KENOVA set line V224 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 49

5 Maintenance and Service

5
Maintenance and Service
5.1

Cleaning

The machine components are supplied with corrosion protection.
Use a cold cleaning agent to clean the machine components!
Risk of damage to device through degreasing!
When cleaning the machine components and removing the corrosion protection, do not
use chlorinated hydrocarbons such as PER, TRI, etc. Never use steam jets,
compressed water or compressed air for cleaning! These can cause dirt or cleaning
agents to enter the guides and seals, disabling functions, especially safety functions,
limit switches or measurement systems.
If you use petroleum ether, you should only carry out cleaning in the open air,
taking special safety precautions (fire hazard)
Collect the runoff of cleaning agents and dispose of it properly. Ensure that the live
parts of the unit are kept free of metal chips
You can ensure the functioning of the device by cleaning it regularly with soft, lint-
free cloth and oiling it with preservative such as silicon oil. If the unit is visibly soiled,
you can also clean it using a commercially available cold cleaning agent.
KENOVA set Line V224  Kelch GmbH 2013
Kelch GmbH • Werkstraße 30 • D-71384 Weinstadt-Endersbach • Tel. (+49)7151 20522 0 • Fax (+49)7151 20522 11 • info@kelchgmbh.de
Seite 21

Publicidad

Tabla de contenido
loading

Tabla de contenido