Maintenance - KELCH KENOVA set line V224 Manual De Instrucciones

5.2

Maintenance

All mountings on rolling bearings are permanently lubricated.
Any grease nipples that exist are standard elements at the corresponding components.
The low lead means that the bearings do not require lubrication.
Ensure that the live parts of the device are kept free of metal chips. Do not use
compressed air to clean the device!
To be able to work permanently with the expected accuracy requirements as well as
outstanding quality, we recommend that you have maintenance work carried out
regularly.
Maintenance work
Check protective covers
Check spindle for
eventually damage
Check tool holder (adapter
sleeve) for eventually
damage
Clean the safety glass
cover of the camera and
the light source
Check the maintenance
unit settings (5 bar)
Check the shaft and idler
rollers for wear
Seite 22
Kelch GmbH • Werkstraße 30 • D-71384 Weinstadt-Endersbach • Tel. (+49)7151 20522 0 • Fax (+49)7151 20522 11 • info@kelchgmbh.de
Maintenance Interval
Daily Weekly
X
X
X
X
X
KENOVA set Line V224  Kelch GmbH 2013
5 Maintenance and Service
Result
Annually Works
□
□
□
□
□
□
X
Defective
□
□
□
□
□
□