Light Function; Remote Control; Timer Function - SOLAC HU1065 Instrucciones De Uso

Add cold water (18-22ºC) without filling it com-
•
pletely. Maximum capacity: 1.8 l. approx.
Put the cover back and turn it clockwise. Be
•
sure that it is closed firmly.
Turn the tank back over and place it on the
•
base while making sure that it is seated cor-
rectly.
When placing the water tank (5) back on the
•
base, some of the water it contains enters the
base (8); this is part of the normal operation of
the appliance and does not entail any risk.
If you wish to use an aroma essence pour a
•
few drops (3 -5) into the aroma compartment
(10).
Plug the humidifier into the mains.
•
Press mist regulator button (1) and a green in-
•
dicator light will come on.
Choose the flow of steam desired by pressing
•
the button (1). Theres are two intensity levels.
1st press: High Intensity
2nd press: Low Intensity
3rd press: Off
We recommend you start with a low flow to
•
avoid condensation and increase this if nec-
essary.
If there is insufficient water in the tank, the
•
green pilot light of the mist level will flash three
times with a beep and the humidifier will turn
off. Before turning the device back on, it will be
necessary to refill the tank with water.
When you want to stop the appliance from
•
emitting steam, press the mist regulator button
(1) several times (High, Low, Off) till it goes off.
Unplug the humidifier from the mains socket
•
and empty the water tank and interior tank.

LIGHT FUNCTION

The device can work as a humidifier, as a lamp
•
or as a humidifier and lamp at the same time.
The lamp function can be selected through the
•
device or through the remote control.
Select the desired light intensity, from highest
•
to lowest intensity, by pressing the button (2)
of the appliance or the button (c) of the remote
control.

REMOTE CONTROL:

a) On / Off button. Press-
ing once turns on and
selects the highest mist
and lighting levels. When
pressing again, the device
switches off.
b) Mist regulator button (2 levels): Choose the
flow of steam desired by pressing the button.
c) Light intensity regulator button. 3 levels: High,
Medium, Low.
d) Mist timer to turn off the nebulizer automatical-
ly after a specific time interval (1, 2 or 4 hours).
e) Led light timer to switch off the light auto-
matically after a specific time interval (1, 2 or 4
hours).

TIMER FUNCTION

The operating time of the mist and light of the
•
device can be controlled.
Mist
•
turned on and by pressing the button (3) on
the appliance or the button (d) on the remote
control.
Led light
•
on and by pressing the button (e) on the re-
mote control.
The selection made will be reflected in the hu-
•
midifier by a green indicator light that changes
position according to the chosen option.
CLEANING
Disconnect the appliance from the mains and
•
allow it to cool before undertaking any cleaning
task.
Clean the electrical equipment and the mains
•
connection with a damp cloth and dry. DO NOT
IMMERSE IN WATER OR ANY OTHER LIQ-
UID.
Clean the equipment with a damp cloth with a
•
few drops of washing-up liquid and then dry.
Do not use solvents, or products with an acid
•
b
c
or base pH such as bleach, or abrasive prod-
ucts, for cleaning the appliance.
d
e
Never submerge the appliance in water or any
•
other liquid or place it under running water.
a
Never submerge the connector in water or any
•
other liquid or place it under running water.
1st press: High Intensity
2nd press: Low Intensity
3rd press: Off
timer: This works with the mist function
1st press: 1 working hour
2nd press: 2 working hours
3rd press: 4 working hours
4th press: Time is cancelled
timer: This works with the lighting
1st press: 1 working hour
2nd press: 2 working hours
3rd press: 4 working hours
4th press: Time is cancelled
EN