User Manual - Invacare H2080 Manual Del Usuario

addresses, see back page of this manual. If necessary, we
will provide you with a high resolution PDF file of the user
manual.
Intended use
The product is intended exclusively as an aid for showering
and for use in the bathroom by adult people who have:
• Difficulty standing or keeping their balance
• Weak legs or lower limb disability
• Medical conditions that impair their balance
The product is intended for homecare use only and not for
intensive use in institution. Any other use is prohibited.
Operating temperature: 10 - 40 °C
Max. user weight: 120 kg
Compliance
Quality is of the utmost importance for our company; all
processes are based on the ISO 13485 standard.
This product features the CE mark, in compliance with the
Medical Device Directive 93/42/EEC Class 1.
Invacare is continuously working towards ensuring that the
company's impact on the environment, locally and globally,
is reduced to a minimum. We only use REACH compliant
materials and components.
For further information please contact Invacare in your
country (for addresses, see back page of this manual).
Warranty
We provide a manufacturer's warranty for the product
in accordance with our General Terms and Conditions of
Business in the respective countries. Warranty claims can
only be made through the provider from whom the appliance
was obtained.
Scope of delivery (Fig. 1)
Seat
A
Backrest
B
Frame with armrest
C
and rear castor with
wheel lock (left and
right)
Footrest
D
Front castor (2x)
E
Screw (M6x65) (2x)
F
Screw (M6x50) (6x)
G
Service life
The expected service life of this product is three years when
used in accordance with safety instructions and intended
use, stated in this manual. The effective service life can vary
according to frequency and intensity of use.
Safety
Safety information
WARNING!
Risk of injury!
– Do not use if defective.
– Keep product away from open flames.
– Do not place smoldering cigarettes on the
product.
1601657-A
Saddle spacer (10x)
H
Nut (M6) (2x)
I
Covering cap for nut
J
(2x)
Covering cap for screw
K
(6x)
Allen key
L

User manual

M
WARNING!
Risk of falling!
– Do not stand on this product.
– Do not use as a climbing aid.
WARNING!
Risk of burning your skin!
The product components can heat up when
exposed to external sources of heat.
– Do not expose the product to strong sunlight
before use.
WARNING!
Risk of injury!
– Only use spare parts and accessories intended
for this product.
Symbols on the product
The identification label is located on the inner side of the
rear frame. Refer to Fig. 2.
Product designation
A
Date of manufacture
B
C Maximum user weight
D Manufacturer address
E This product complies with Directive 93/42/EEC
concerning medical devices. The launch date of this
product is stated in the CE declaration of conformity.
Read user manual
F
For use on even surfaces only
G
H Lot number
I Warning label: Risk of entrapment when folding the
armrest (located on the inner side of the rear frame
under the armrest on each side)
Assembly
CAUTION!
Risk of entrapment
– Be careful during assembly.
CAUTION!
– Follow the correct direction of mounting the
saddle spacers.
Perform each of the following steps on both sides of the
shower chair. Refer to Fig. 3.
1. Mount both tubes of the seat A to the frame C using
screws G and saddle spacers H. Cover the screw heads
with caps K.
2. Mount the tube of the backrest B to the frame C using
screws G and saddle spacers H. Cover the screw heads
with caps K.
3. Mount the front castor E into the frame tube C.
4. Mount the footrest D to the frame C using screws F,
saddle spacers H and nuts I. Cover the nuts with caps
J.
3