Sears Kenmore 66513293K110 Instrucciones De Instalación página 15

Option 1, Countertop Attachment
1_! g Insert bracket .
Tabs must point
Remove the brackets from the package and insert into the open
slots on the left and right-hand top of the dishwasher collar as
shown.
Using a pair of pliers, bend the tab down to secure the bracket
in place. Repeat this step for the other side.
NOTE: Do not attach the dishwasher. This will be done later.
Option 2, Side Attachment
For marble, granite, or other hard surface countertops
NOTE: Remove the brackets from the parts package.
Score line
Break off the end of the bracket along the scored line.
With another person holding the rear of the dishwasher to keep
it from tipping, open dishwasher door and place towel over
pump assembly and spray arm of dishwasher. This will keep
screws from falling into pump area when you are securing
dishwasher to cabinet.
Push the plastic buttons out of the side of the tub.
NOTE: Save the buttons to cover the holes after dishwasher is
installed.
Bend /
tabs _,/
Push bracket into slot on the side of dishwasher, and bend tab in
toward the side of the dishwasher so that it keeps the bracket in
place. Repeat this step for the other side of the dishwasher.
NOTE: Do not attach the dishwasher. This will be done later.
15