Hilti DCH 150­SL Manual De Usario página 22

▶ Wear ear protectors. Exposure to noise can cause hearing loss.
▶ Take breaks between working and do relaxation and finger exercises to improve the blood
circulation in your fingers.
Electrical safety
▶ Before beginning work, check the working area (e.g. using a metal detector) to ensure that no concealed
electric cables or gas and water pipes are present. External metal parts of the power tool may become
live, for example, when an electric cable is damaged accidentally. This presents a serious risk of electric
shock.
▶ Check the machine's electric supply cable at regular intervals and have it replaced by a qualified
electrical specialist if found to be damaged. If the power tool's supply cord is damaged it must be
replaced with a specially-prepared and approved supply cord available from Hilti Service.
3 Description
3.1 Product overview
3.2 Intended use
The product described is an electrically powered slitting tool for professional use.
It is designed for use with diamond slitting discs.
The machine is designed to be used with a suitable vacuum cleaner.
Optionally, the slitting tool can be combined with a line laser for projecting the line of cut on to the surface
ahead.
3.3 Possible misuse
Do not use the product in environments where there is a risk of explosion.
Use of the product in a damp or wet environment is not permissible.
Do not use the product to work on hazardous or flammable materials (e.g. asbestos, magnesium, wood).
Do not tamper with or attempt to make alterations to the device.
18 English
1
On/off switch
@
Vacuum cleaner hose connector
;
Tubular bubble level
=
Plunge movement lockbutton
%
Front grip
&
Carriage
(
Service indicator
)
Rear grip
+
Locking switch for plunge depth
§
Carriage release button
/
Cutting line indicator
:
Spindle lock button
∙
Slitting-depth adjusting knob
$
Interface for DCH-SL LG line laser
£
2208335
*2208335*