Changing The Dust Bag - Domo DO7282S Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 34
www.domo-elektro.be
DO7282S

CHANGING THE DUST BAG

The vacuum cleaner cannot be used without the dust bag. When the dust bag is full or
damaged you need to replace it immediately.
1. Pull the clip of the lid of the dust bag to open it.
2. Remove the dust bag and place a new one in the correct position.
MAINTENANCE
1. Motor filter
The motor filter is situated in the dust bag compartment. You need to change or
clean the motor filter when it is visibly dirty. This can improve the efficiency of your
vacuum cleaner and prolong the life. It is recommended to at least clean the motor
filter twice a year.
1. Remove the filter
2. Clean it thoroughly
3. Let it dry by exposure to air
4. Put it back into the vacuum cleaner
2. Micro filter
When the micro filter, which is situated at the back of the vacuum cleaner, becomes
dirty, you need to clean it or replace it. When the filter becomes dirty the airflow will
be obstructed, with the possibility of overheating your vacuum cleaner. This can lead
to a malfunction of your vacuum cleaner.
1. Remove the lid of the micro filter.
2. Clean the filter thoroughly by beating it out or replace it. Don't wash the filter!
3. Replace the filter.
4. Place the lid back on the vacuum cleaner.
33

Publicidad

Tabla de contenido
loading

Tabla de contenido