English - Philips HR 1734 Manual De Instrucciones

English

Important
• Read the instructions carefully and look at
the illustrations before you start using the
appliance.
• To avoid damage, check if the voltage
indicated on the appliance corresponds to
the mains voltage in your home (110-127 V
or 220-240 V) before you connect the
appliance.
• Never use any accessories or parts from
other manufacturers or which have not been
specifically advised by Philips. Your
guarantee will become invalid if such
accessories or parts have been used.
• For optimal results and to prevent damage
to the appliance, follow the instructions with
regard to the maximum and minimum
processing quantities.
• Never remove accessories or parts from the
motor unit while the appliance is running.
Always unplug the appliance first.
• Keep the appliance out of the reach of
children.
• Never let the appliance run unattended.
• Do not use the appliance when the mains
cord, the plug or other components are
damaged.
• If the mains cord of this appliance is
damaged, it may only be replaced by a cord
of the original type. Turn to your Philips
dealer or the Philips organisation in your
country for replacement.
Blender
• Do not fill the blender jar with ingredients
that are hotter than 80 °C.
• To avoid spillage, do not fill the jar above the
maximum level indication (i.e. 1.5 litres),
particularly not when you are blending
liquids. Always insert the stopper into the lid
before you start processing.
• Never put your hand or any other object in
the blender jar while the appliance is
switched on. If necessary, use a spatula to
remove food from the wall of the jar after
you have switched the blender off.
• Before you start using the blender, make
sure that the blade unit is securely fitted to
the blender jar (see 'Preparing the blender
for use').
• Always make sure that the lid is in "closed
position" when processing ingredients.
Mill (only type HR 1737)
• The cutting edges of the blade unit are very
sharp: avoid touching them!
• Never let the mill accessory run for more
than 30 seconds without interruption.
• Always make sure that the rubber sealing
ring has been correctly placed before you
start using the appliance.
• Do not use the mill accessory to process
liquid ingredients.
• The mill accessory is not suitable for
grinding very hard ingredients, such as
nutmeg and ice cubes.
• Always process cloves, star anise and
aniseed together with other ingredients. If
they are processed separately, they may
attack the plastic parts of the mill.
Filter
• Do not use the filter to process hot
ingredients.
• Make sure the filter has been properly
inserted before you switch the appliance on.
4