EIBENSTOCK EPG 400 WP Instrucciones De Servicio página 17

Instruction for use
Switch the machine on and put it carefully on the surface you want to work on.
Using with water:
Open the water supply and regulate the
water flow.
Hold the machine with both hands and move it in a linear or rotary way.
Always make sure you observe the plaster manufacturer's product
information and notes on use.
If the notes on use and the dwell times of the plasters are observed, optimum
results can be achieved.
! Attention!
Do not touch rotating parts!
Care and Maintenance
Before the beginning of the maintenance or repair works you
have to disconnect the plug from the mains.
Repairs may be executed only by appropriately qualified and experienced
personnel. After every repair the machine has to be inspected by an electric
specialist. Due to its design, the machine needs a minimum of care and
maintenance. However, the following points have to be observed:
Always keep the power tool and the ventilation slots clean.
During work, please pay attention that no particles get inside the
machine.
In case of failure, a repair has to be carried out by an authorised
service workshop.
Our after-sales service responds to your questions concerning
maintenance and repair of your product as well as spare parts.
EIBENSTOCK's application service team will gladly answer questions
concerning our products and their accessories.
17