Deleting Your Remote Control From Somfy Equipment; Deleting The Programmed Channel From A Somfy Remote-Controlled Lamp Holder Or Socket - SOMFY SITUO 5 io/RTS Manual De Instalacion Y Uso

4
DELETING YOUR REMOTE CONTROL FROM SOMFY
EQUIPMENT
4.1 Deleting the programmed channel from a Somfy remote-controlled lamp holder
or socket
1. Check that the remote-controlled lamp holder/socket is switched on.
During this operation, disconnect all other lamp holders and sockets for Somfy remote-controlled devices in your
home.
2. Press the channel selection button as many times as necessary until the indicator lights show the channel to
be deleted.
3. Press the programming button on the remote-controlled lamp holder/socket until the indicator light flashes.
4. Use a fine-tipped object to make a short press on the PROG button on the back of the remote control.
The indicator light on the remote-controlled lamp holder/socket goes off.
2
Examples of Somfy remote-controlled lamp holders and sockets
8 EN - Installation and operating guide for io / RTS centralisation remote control - SOMFY
3
3 s
3 s
4
3 s
< 0.5 s