Replacing The Battery - SOMFY SITUO 5 io/RTS Manual De Instalacion Y Uso

7

REPLACING THE BATTERY

Risk of explosion if the battery is replaced by an incorrect type.
1. Unscrew the rear casing of the remote control.
2. Push the battery out of its housing using a plastic object.
3. Insert a 3V CR2430 or CR2032 battery, with the plus (+) side visible. Make sure the polarity is correct.
The power supply terminals must not be short-circuited.
4. Push the battery fully into its housing.
5. Screw the rear cover back into place.
Please separate batteries from other types of waste and recycle them via the local collection
system.
1
4
12 EN - Installation and operating guide for io / RTS centralisation remote control - SOMFY
2
5
3
CR2430
or
CR2032