Care And Maintenance - Rothenberger ROMAX Compact Instrucciones De Uso

3 Remove the battery.
4
Disconnect mains power plug from the mains
power socket.
Storage:
The place of storage must be inaccessible for
children.
1
Remove the battery.
2 Disconnect mains power plug from the mains
power socket.
3
Store battery charger in a dry, frost-proof
place.
Store the battery only in a charged state! Fully
recharge the battery after 12 months of storage, at
the latest!
Troubleshooting:
Before eliminating faults, disconnect the
mains power plug!
- lamp yellow (3) flashes:
Battery temperature outside the permissible
charging temperature (5°C to 45°C).
The Charging will begin automatically once the
battery reaches the correct charging
temperature.
In the event of other faults, please contact
ROTHENBERGER Service. Repairs should only be
carried out by ROTHENBERGER service centres or
dealers authorised by ROTHENBERGER.
Symbols:
The battery clamps of the charger are
fed by mains supply. Do not touch the
tool with conducting objects.
Please read the instructions carefully
before starting the machine.

Care and Maintenance

ROMAX Compact:
Remove the battery prior to carrying out any work
on the machine.
Check that the press jaws are fully functional.
Damaged press jaws must not be used and must
be sent to an authorised workshop.
Check that the press jaw and drive rolls move
freely.
Check the bolt for signs of damage at regular
intervals.
Have damaged bolts replaced by an authorised
repair shop.
Clean and grease the drive rolls, the bolt and press
jaws when you have finished work.
Use only high quality pressing or ball bearing
grease.
The pressing contour must be kept free of grease.
All other servicing, maintenance and repair work
must be carried out by an authorised
ROTHENBERGER repair shop.
If the seal is damaged the warranty will be null and
void.
After 10.000 pressing cycles or 1 year have the
machine serviced by an authorised workshop.
When dispatching the machine ensure that it is
packed in its carrying case completely with battery
and charger in the carry case only.
Electro-hydraulic machine does not exceed 3 hours
in a -5° C storage.
Disconnect battery from machine before storing.
Charger:
If the supply cord of this appliance is damaged, it
must only be replaced by a ROTHENBERGER repair
shop appointed by the manufacturer, because
special purpose tools are required.
Accessories
The relevant accessories and an order form can be
found from Page 122 onwards.
Disposal
Components of the unit are recyclable material and
should be put to recycling. For this purpose
registered and certified recycling companies are
available. For an environmental friendly disposal of
the non-recyclable parts (e.g. electronic waste)
please contact your local waste disposal authority.
Old batteries can be taken to your specialist dealer
who will dispose of them in conformity with
environmental regulations.
For EU countries only:
Do not dispose of electric tools with
domestic waste. In accordance with
European Directive 2012/19/EC on
waste electrical and electronic
equipment and its implementation as national law,
electric tools that are no longer serviceable must be
collected separately and utilised for
environmentally compatible recycling. Used
removable batteries must not be thrown in fire or
in the household rubbish.
ENGLISH
13