Routine Maintenance - Sartorius YDP40 Instrucciones De Funcionamiento

8

7 Routine Maintenance

$ Cleaning the print head and platen roller
1) Turn off the printer power and open the top cover.
2) If printing has just finished, please wait until the print
head has completely cooled.
3) Use alcohol cotton (should be wrung out) to wipe off
the stains and dust on the surface of the print head and
platen roller.
4) Once the alcohol has completely evaporated, close the
top cover.
!
Caution:
§ Do not use hard objects (for example: forceps) on the
print head and platen roller.
§ To increase the lifetime of the print head, it is
recommended to clean the print head and platen roller
every month. If the environment is dirty, increase the
cleaning times accordingly.
$ Cleaning the sensor
1) Turn off the printer power and open the top cover.
2) Use alcohol cotton (should be wrung out) to wipe off
the stains and dust on the surface of the sensor.
3) Once the alcohol has completely evaporated, close the
top cover.
$ Clearing a paper jam
1) Turn off the printer and press the top cover open lever
to open the top cover.
2) Clear the paper jam and close the top cover.