Maintenance - Sartorius YDP 20-PH Instrucciones De Manejo

Maintenance

Changing the Paper Roll
The paper rolls used with your data printer must have the
following specifications (see "Accessories"):
– Standard paper roll
– Wood-free 60 g paper
– Width: 57.5 ± 0.5 mm
– Diameter: up to 65 mm
– Open core diameter: min. 8 mm
§ Open the paper compartment: Lift the paper compartment
cover.
§ Release the roll holders on both sides of the roll core by
pulling in the outward direction.
§ Remove the old roll core.
$ Place the new paper roll on a flat surface.
$ Place the roll with the paper feed on the underside and
facing towards you.
§ Grip the paper roll between the thumb and index
finger of one hand and hold it vertically above the roll
compartment.
§ With the other hand, feed the paper into the inlet slot
underneath the ink ribbon.
§ Feed the paper through the ink ribbon cassette: With the
printer switched on, repeatedly press or hold down the
G key.
> Draw the paper into the ink ribbon cassette and feed it
upwards.
13