Speedlink WASP 2 Manual Del Usuario página 2

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

Introduction
D
Thank you for the confidence you placed in
GB
SpeedLink by choosing the WASP 2. The added
Throttle and Coolie Hat function, which you
F
can use simultanously, guarantee an exciting
gameplay and the especially ergonomically
E
shaped grip offers a maximum comfort in every
situation.
I
Features:
• 4 fire buttons
• Coolie Hat
• Throttle
Configuration in Windows
95/98/ME/XP:
1. Exit Windows.
2. Connect the 15-pin game port of the
joystick to the game port 1 of the
sound or game card.
3. Restart your computer.
4. Open the start menu. Choose
„Settings" and then click on „Control
Panel". (Note: In Windows XP you can
select „Control Panel" directly).
5. Choose the icon „Gamecontroller". (Note:
In Windows ME this option is called
„Gaming options").
2
6. Under Win 95/98/ME: Click on „Add" and
select „Thrustmaster Flight Control System".
Activate the „Rudder/Pedals" box. Confirm
with „OK".
Under Win XP: Click on "Add" and select
"Thrustmaster Top Gun Platinium". Do NOT
acitivate the "Rudder/Pedals" box. Confirm
with "OK".
7. On your screen appears a list of
controller in which you will find the driver you
have selected.
Note: Remove any other drivers listed under
"Gamecontroller".
8. Now select „Properties" and then
„Calibrate".
9. Follow the instructions on the screen. After
the gaming device has been calibrated
choose the option "Test" to verify the device
has been calibrated properly.
10. If all settings are functioning correctly,
click on „Apply" and then on "OK" to finish
the calibration menu. In case, some of the
settings does not function properly, please
repeat steps 8 to 9, until all functions work
correctly.
Troubleshooting
The joystick control panel tells me that the
WASP 2 is not connected properly.
1. Make sure that the WASP 2 is connected
D
GB
F
E
I
3

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Sl-6611

Tabla de contenido