Synchronized Disc Recording - JVC UX-P400 Serie Manual De Instrucciones

Ocultar thumbs Ver también para UX-P400 Serie:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

3
Select and start playing the source—"FM," "AM,"
"CD," or "AUX."
• When recording a disc, you can also use "Synchronized
Disc Recording" (see below).
4
Start recording.
On the main unit
To stop recording:

Synchronized Disc Recording

You can start and stop both disc play and tape recording at
the same time.
To record the entire disc
1
Load a disc and insert a recordable cassette.
• If the current playing source is not the CD player, press
CD 3/8, then 7.
2
Check the tape running direction and Reverse Mode
settings on the display.
• See step 2 of "Recording on a Tape" on page 17.
3
Start recording.
The System automatically
REC
creates 4-second blanks between
the tunes recorded on the tapes.
On the main unit
• When either CD play or recording ends, both CD player
and the cassette deck stop at the same time.
To record a "Live" disc
It will not be desirable to put 4-second blank portions
between the tunes recorded on the tape.
To record the entire disc without any interruption
recorded, pause the disc play (press CD 3/8 twice)
before pressing REC.
18
REC
To record Program Play or Random Play
1 Select Program Play (and make a program) or Random
Play, but do not start playback.
2 Press REC to start recording.
• When CD play stops, recording continues. It is required
that recording be stopped manually.
To record only your favorite track
You can specify tracks to be recorded on the tape while
listening to a disc.
1
Start playing a disc.
2
While a track you want to record on the tape is
playing...
The CD player returns to the
REC
beginning of that track and the
track is recorded on the tape.
After recording the track, the CD
player and cassette deck
On the main unit
automatically stop.
3
Repeat steps 2 and 3 to record other tracks you want.
• You can exchange the discs if necessary.
To protect your recording
Cassettes have two small tabs on the back to protect
from unexpected erasure or re-recording.
To protect your recording, remove these tabs.
To re-record on a protected tape, cover the holes with
adhesive tape.

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Ca-uxp400Sp-uxp400

Tabla de contenido