Step 3: Hook Up - JVC UX-P400 Serie Manual De Instrucciones

3
Step : Hook Up
If you need more detailed information, see page 6.
Illustrations of the input/output terminals below are typical
examples.
When you connect other components, refer also to their
manuals since the terminal names actually printed on the rear
may vary.
Turn the power off to all components before connections.
For better FM/AM reception
Outdoor FM
antenna
(not supplied)
Disconnect the supplied FM antenna, and connect to an outdoor FM
antenna using a 75 Ω wire with coaxial type connector (IEC or DIN45325).
AUX
VCR, etc.
4
AUDIO OUT
White
LEFT
RIGHT
Red
To a wall outlet
Plug the AC power cord only after all connections are complete.
AM loop antenna (supplied)
Turn it until the best reception is obtained.
AM loop antenna
Keep it connected.
Vynile-covered wire (not supplied)
Extend it horizontally.
Audio cord (not supplied)