Quick User Guide - Promax TV EXPLORER HD Manual De Usuario

USER'S MANUAL. TV EXPLORER HD

4 QUICK USER GUIDE

STEP 1.- Battery charging
1.
Connect the DC external charger to the equipment through connector [32] located on
the lateral panel.
2.
Connect the DC charger to the mains.
3.
When the equipment is connected to the mains, the CHARGER led [4] remains
lighted.
STEP 2.- Power on and signal connection
1.
Hold the rotary selector [1] pressed until the equipment is powered on.
2.
Connect the RF signal source in the input connector [30].
Figure 2.- Power on and signal connection.
11/2009
Figure 1.- Battery charging
Page 17