Promax TV EXPLORER HD Manual De Usuario página 166

During the scan you should realise that the key RUN has changed and has been
renamed as RESTART. This mean that you may restart a new finding anytime before
last finding had finished. To do it, press the rotary knob on RESTART.
If during scanning the instrument is unlocked, the screen will show a warning
message of the incident.
Once the scanning is over, you will see the detected echoes on the screen
(Figure 46.-). Now you can analyse them in more detail.
To navigate between the detected echoes:
1. Place the cursor
2. Press the rotary knob. Then, the vertical cursor will placed on the first echo
(Figure 47.-).
3. Once the cursor is on the first echo, you should see at the bottom of the
screen the delay and distance measurements of the echo with regard to the
carrier.
4. Press the rotary knob again to switch to the next echo.
Page 68
USER'S MANUAL. TV EXPLORER HD
Figura 46.- ECHOES found.
[6] on the menu option "FIND ECHO".
11/2009