Automatic Signal Identification Function (Auto Id) - Promax TV EXPLORER HD Manual De Usuario

5.8 Automatic signal identification function (AUTO ID)

The TV EXPLORER HD
the established configuration, which are presents in the channel or tuned frequency. In
order to activate this function must once press
combine this process with the spectrum monitoring
marker on the levels susceptible to contain a transmission, and activating later the
process of automatic identification in order to identify the present signal.
Figure 9.- Signal automatic identification screen. AUTO ID.
First it recognises whether the signal is an analogue channel or a digital one. If the
channel is analogue, it determines the television standard of the signal. When the signal
is digital (DVB), it analyses for each modulation type QAM / QPSK / 8PSK / COFDM all
the associated parameters such as the modulation system: carriers 2k/4k/8k, symbol
rate, code rate, etc.,. and determines the value of the signals under test.
If the AUTO ID function is launched in the spectrum analyser mode, the name of
the network will appear temporarily on screen (it also appears in the measurement
display). In case of working in the satellite band the orbital position appears as well.
Whenever the process detects new parameters for a channel or frequency will
create a new channel plan containing the detected information.
Page 34
USER'S MANUAL. TV EXPLORER HD
allows automatically identifying TV signals, according to
[25] key. Specially useful, is to
[13], so that after locating the
11/2009