Antenna Alignment Function; Diseqc Command Generator - Promax TV EXPLORER HD Manual De Usuario

5.20 Antenna Alignment Function

Pressing the key
align antennas using a faster sweep without display of numerical measures. The display
appears divided in two parts, the left one shows the spectrum of the signals detected in
the band and on the right two analogue bars represents the more high signal level found
during the last carried out sweeping. The left bar shows the peak value with a certain
persistence. The right bar shows a filtered average value.
Figure 52.- Utility for antenna alignment.
Simultaneously the instrument emits by means of the loudspeaker an acoustic
tone, which varies according to the level of received signal.

5.21 DiSEqC Command Generator

7
DiSEqC ('Digital Satellite Equipment Control') is a communication protocol
between the satellite receiver and the accessories of the installation (switches, LNBs,
etc.) proposed by Eutelsat, with the aim to standardize the diversity of switching
protocols (13 - 18 V, 22 kHz) and to satisfy the demands of the digital TV installations.
In order to define and/or to send a sequence of DiSEqC commands, press the
DiSEqC key [21] on frontal panel. It allows to define the satellite band configuration
parameters and select through SEND function one of the eight predefined programs
which execute basic functions to control an universal switch with two or four inputs, by
means of the rotary selector [1].
7 DiSEqC
TM
is a trademark of EUTELSAT.
Page 76
USER'S MANUAL. TV EXPLORER HD
[23] you access the function Antenna Alignment in order to
11/2009