Promax TV EXPLORER HD Manual De Usuario página 181

USER'S MANUAL. TV EXPLORER HD
The TV EXPLORER
possibility of supporting various conditional access systems, so that video and/or audio
broadcast by encrypted services (scrambled TV for subscribers) may be decoded following
the SimulCrypt model. It provides a standard connector to insert CAM modules
(Conditional Access Module), which allows a specific management for each codification
system.
SimulCrypt is a process supports various parallel conditional access systems,
together with the encryption algorithms specified by DVB-CSA (Common Scrambling
Algorithm) to control access to pay-TV services. The SimulCrypt broadcasts Transport
Stream contains keys for various conditional accesses, thereby allowing reception by
more than one type of decoder.
The user just needs to insert the subscriber Smart-Card in the CAM module
connector designed for this purpose. When a CAM module has been inserted and the
instrument is in the digital TV operation mode, accede to the Measurement
configuration menu by pressing the
INTERFACE option. By means of this option the user can navigate through the CAM
module menu. Whenever an option is selected, the waiting
module allows accessing to the next menu or to the option selected.
In order to insert or to change one CAM module, follow these steps:
- The CAM module connector [38] is located on the equipment rear panel. Place
the instrument on a stable surface and insert the module so the printed arrow
appears on visible upper face, pressing until the extractor mechanism button
[39] becomes activated.
Figure 59.- Subscriber Smart-Card and CAM module insertion.
- To extract an inserted CAM module, press the button from extractor
mechanism [39] and remove the module.
11/2009
HD by means of Common Interface method offers the
[17] key and select the COMMON
icon appears until the
Page 83