Sony SU-WL500 Manual De Instalación página 14

2
Remove the screws from the
rear of the TV.
XBR-75X900E/XBR-65X900E/XBR-55X900E/
XBR-49X900E/XBR-65X850E/KD-75X9000E/
KD-65X9000E/KD-55X9000E/KD-49X9000E/
KD-65X8500E/KD-55X8500E
3
Referring to the Screw and Hook
locations diagram/table on
page 20, determine the screw
positions, and secure the
Mounting Hook to the rear of the
TV.
 Secure the Mounting Hook to the rear of the
TV temporarily, using the four screws
(+PSW6 × 25).
 Be sure that both screws are securely
tightened with equal torque strength to the
rear of the TV.
Mounting
Hook
14
(GB)
Screw
(+PSW6 × 25)
(not supplied)
Spacer × 5
(not supplied)
10 mm (13/32 inch)
4
Make sure that the screw 
firmly secures the arm base of
the Mounting Hook (both left
and right).
Notes
• When installing in portrait orientation, be sure to
keep the Mounting Hook angle to 0 degrees. Do
not use another angles.
• Make sure that the two arm bases are screwed in
securely.