Operation By Remote Control - Bigben BTLS RABBIT XL Manual De Instrucciones

OPERATION
Turn on/off the luminous speaker
1. long press the power button at the speaker bottom for 2-3 seconds , the light and BT will be on
automatically.
2. long press the power button at the speaker bottom for 2-3 seconds again, the light and BT will be
off automatically. Only after you press the button on the speaker, the speaker is truly been turn off.
CHARGING
1. Connect speaker with the 15V DC adaptor.
2. The Red LED indicator besides the power button will turn ON when charging, and turn OFF when
fully charged.
3. Unplug the USB charging cable after fully charged.
Play music by BT
1. Turn on the speaker, Keep the speaker and device within 1 meter of each other.
2. Start the Bluetooth function on your mobile device and select "Luminous" in the Bluetooth device
list (depending on the Bluetooth version of your device you may have to enter pass code '0000').
Play music by USB player
• Turn on the speaker, insert the USB player into USB port, then can listen music from USB player.
Play music by AUX IN cable
• Turn on the speaker, you can connect music device to the luminous speaker via the AUX port using
the cable included.
Priority of audio source: Bluetooth/USB/AUX
• Bluetooth is set as default, speaker will play music via Bluetooth after being switched on.
• As soon as you plug-in USB, the speaker will play music via USB. It will also play music via USB the
next time when you switch on the unit if USB is plugged in.
• As soon as you plug-in AUX, the speaker will play music via AUX. It will also play music via AUX the
next time when you switch on the unit if AUX is plugged in.
• If both USB and AUX are plugged-in, speaker will play via USB.

OPERATION BY REMOTE CONTROL

1. Stand by button: After turn on the speaker (by pressing power button which located on back of
the speaker), short press this button to turn off the light and Bluetooth, short press again to turn
on the light and Bluetooth.
Long press this button to switch off the speaker, then you have to press power button which
located on back of the speaker to turn on it again.
2. Brightness intensity button: Change brightness intensity when the light is fixed on one single
color.
3.
for all functions on remote control. Once the color light is on, press ON/OFF button again is only
to turn or off the lighting,This color light has memory storage function when electricity is not
exhausted. The light could keep the same lighting working mode or color which you turned off last
- EN 3 -