Remote Control; Power; Operating The Usb Player; Connect The Bluetooth - Bigben TW11 Modo De Empleo

REMOTE CONTROL

10
1
2
3
4
5

Power

• This unit is designed to operate on with a DC 7V adaptor.
• Insert the small plug of the adaptor into the DC Jack.
• Insert the AC/DC adaptor into any convenient having 230V~AC, 50Hz household outlet that is either
vertical or horizontal.
Auto standby
When no music play from a connected device, the product automatically switches to standby if:
No audio from a connected device for 10 minutes.

Operating the USB player

1. Press the POWER button then press the MODE button repeatedly until the USB yellow LED
indicator is on.
2. Connect the USB disk to the system's USB slot.
3. The USB disk will play automatically
4. Press the PLAY/PAUSE button again to stop playing temporarily. Resume normal play by pressing
the PLAY/PAUSE button again.
5. To stop playback, press the STOP button.
6. To turn off the unit, press the POWER button again.

Connect the Bluetooth

1. Press the POWER button and press the MODE button repeatedly until the Bluetooth blue LED
indicator begins to flash.
2. Turn on the Bluetooth feature on your mobile compatible device. Search for TW11. Pair and
connect to TW11. The blue LED indicator will be steadily illuminated once the Bluetooth is paired.
3. You can now start playing your music by pressing the PLAY/PAUSE button.
4. Press the PLAY/PAUSE button again to stop playing temporarily. Resume normal play by pressing
the PLAY/PAUSE button again.
5. Press the |<< or >>| button to choose the previous or next song.
6. When you have finished listening, press the POWER button again.
Note: The maximum connection distance is around 10 meters. Please place your Bluetooth speaker
as close as possible to this device to avoid the connection being disturbed.
1. TANSMITTER
2. POWER BUTTON
3. STOP BUTTON
9
8
4. SKIP -BUTTON
7
5. VOLUME – BUTTON
6. PLAY/PAUSE BUTTON
6
7. SKIP + BUTTON
8. FUNCTION BUTTON
9. MUTE BUTTON
10. VOLUME + BUTTON
- EN 4 -