Ejecting Beaters
Be sure speed control is at the "OFF" or "O" position and cord is removed from electrical
outlet. Scrape off any excess batter with a rubber spatula. Grasp the stems of the beaters
with your hand and press the beater eject button. Beaters will release into your hand.
CARING FOR YOUR MIXER
Cleaning
Wash the beaters before and after every use. Beaters may be washed in a dishwasher. After
removing cord from electrical outlet, clean mixer head with a damp cloth and wipe dry.
DO NOT IMMERSE MIXER IN WATER. This may cause electric shock, injury, or
damage to the product. Avoid the use of abrasive cleaners that will mar the finish of your
mixer. The motor of your mixer has been carefully lubricated at the factory and does not
require any additional lubricant.
Storage
Coil the electrical cord of the Hand Mixer with a plastic twist fastener. Store the Hand
Mixer on its heel rest in a clean, dry location such as a cabinet or shelf. Store beaters
in a drawer.
Maintenance
Other than the recommended cleaning, no further user maintenance should be necessary.
If for any reason your Hand Mixer should require repairs, do not try to fix it yourself.
Send it to the nearest Sunbeam Appliance authorized service center.
6