Technical Specifications; Noise And Vibration Information - Redstone RS 1400-60 CE Instrucciones De Uso

Technical specifications

Model
▪ Power input
▪ No load speed
▪ Electronic speed pre-selection
▪ Constant electronics
▪ Reversing
▪ Protective clutch
▪ Max. impact rate
▪ Impact energy (EPTA Procedure 05)
▪ Capacity in concrete:
Twist drill bit
Break through drill bit
Core cutter
▪ Chisel positions
▪ Tool holder
▪ Weight (EPTA Procedure 01/2003)
▪ Protection class (EN 60745-1)

NOISE AND VIBRATION INFORMATION

Measured values determined according to EN 60745.
▪ Noise emission
A-weighted sound pressure level L
Uncertainty К
A-weighted sound power level L
Uncertainty К
Wear hearing protection!
▪ Vibration emission *
Total vibration values (vector sum in the three axes) determined according to EN 60745:
Hammer drilling in concrete
Vibration emission value a
Uncertainty К
Chiselling
Vibration emission value a
Uncertainty K
* The vibration emission values are determined according to 6.2.7 EN 60745.
The vibration emission level given in this information sheet has been measured in accordance with
a standardised test given in EN 60745 and may be used to compare one tool with another. It may be
used for a preliminary assessment of exposure.
The declared vibration emission level represents the main applications of the tool. However if the tool
is used for different applications, with different accessories or poorly maintained, the vibration emis-
sion may differ. This may significantly increase the exposure level over the total working period.
An estimation of the level of exposure to vibration should also take into account the times when the
tool is switched off or when it is running but not actually doing the job. This may significantly reduce
the exposure level over the total working period.
Maintain the power tool and the accessories and keep your hands warm during operation to reduce
the harmful effect of vibrations.
Dust from material such as paint containing lead, some wood species, minerals and metal may be
harmful. Contact with or inhalation of the dust may cause allergic reactions and/or respiratory dis-
eases to the operator or bystanders.
14
EN
pA
pA
wA
wA
h,HD
HD
h,CHeq
CHeq
RS 1400-60 CE
1400 W
120 - 250/280 min
-1
Yes
Yes
No
Yes
1170 - 2435/2800 min
-1
4 - 10/12 J
52 mm
80 mm
140 mm
12
SDS-max
8.0 kg
II
93.0 dB (A)
3.0 dB (A)
104.0 dB (A)
3.0 dB (A)
17.0 m/s
2
1.5 m/s
2
9.6 m/s
2
1.5 m/s
2
RS 1400-60 CE