Technical specifications
Model
Variable speed
Constant electronics
Reversing
Drilling
Hammer drilling
Chiselling
Protective clutch
Power input
No load rpm
No load impact rate
Impact energy (EPTA Procedure 05/2009)
Drilling capacity:
in concrete
in concrete with core bits
in steel with adapter and chuck
(not delivered with the machine)
in wood with adapter and chuck
(not delivered with the machine)
Optimum capacity in
concrete with twist drill bits
Tool holder
Chuck capacity
Weight (EPTA Procedure 01/2003)
Protection class (EN 60745-1)
NOISE AND VIBRATION INFORMATION
Measured values determined according to EN 60745.
Noise emission
A-weighted sound pressure level L
Uncertainty К
pA
A-weighted sound power level L
Uncertainty К
wA
Wear hearing protection!
Vibration emission *
Total vibration values (vector sum in the three axes) determined according to EN 60745:
Hammer drilling in concrete
Vibration emission value a
Uncertainty К
HD
Chiselling
Vibration emission value a
Uncertainty К
CHeq
Drilling in steel
Vibration emission value a
Uncertainty К
D
* The vibration emission values are determined according to 6.2.7 EN 60745.
The vibration emission level given in this information sheet has been measured in accordance with
a standardised test given in EN 60745 and may be used to compare one tool with another. It may be
used for a preliminary assessment of exposure.
The declared vibration emission level represents the main applications of the tool. However if the tool
is used for different applications, with different accessories or poorly maintained, the vibration emis-
sion may differ. This may significantly increase the exposure level over the total working period.
14
EN
pA
wA
h.HD
h.CHeq
h.D
RS 900-26CE
●
●
●
●
●
●
●
900 W
0-900 min
-1
0-4100 min
-1
3.2 J
26 mm
68 mm
13 mm
30 mm
Ø6-Ø20 mm
SDS plus
1.5-13 mm
2.9 kg
II
91.0 dB (A)
3.0 dB (A)
102.0 dB (A)
3.0 dB (A)
14.6 m/s
2
1.5 m/s
2
11.0 m/s
2
1.5 m/s
2
6.5 m/s
2
1.5 m/s
2
RS 900-26CE