Information On The App "Smart Life - Smart Living; Information On How To Use The App; System Requirement For Use Of The App; Commissioning Via The App - Profi Care PC-BSR 3043 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 32
Information on the App
"Smart Life - Smart Living"
The
Smart Life - Smart Living App is available for android
and iOS. Scan the corresponding QR code to get directly to
the download.
NOTE:
Depending on the provider, there may be costs involved in
downloading the app.
Google Play

Information on How to Use the App

This appliance allows you to operate the appliance via your
home network. A prerequisite is a permanent Wi-Fi con-
nection to your router and the free app "Smart Life - Smart
Living".
You can easily access all functions of the appliance via the
app. Since the app constantly improved, we can not provide
a more detailed description here.
When you are not at home, we recommend to switch off
the appliance via the main switch to prevent unintentional
switching on!

System Requirement for Use of the App

• iOs 9.0 or higher
• Android 4.1 or higher

Commissioning via the App

1. Install the "Smart Life - Smart Living" app. Create a user
account.
2. Activate the Wi-Fi function in the settings of your appli-
ance.
3. Place the robot vacuum cleaner within a radius of ap-
prox. 5 meters to your router.
4. Press and hold the
button on the robot vacuum
cleaner until the
symbol in the display starts flashing.
5. Launch the app and select " ".
6. Select the "Robot vacuum cleaner" menu and follow the
instructions on the display.
7. Once the appliance has been connected successfully,
the
symbol lights up in the display. Now you can
operate the appliance using the app.
54
PC-BSR3043_IM

Switching the Appliance On / Off

• The appliance is switched on when the main switch /
is set to position .
• Switch off the appliance by setting the main switch to
position .

Buttons on the Remote Control

To operate the appliance with the remote control, it must be
within sight. Point the remote control at the infrared receiver.
Switches the appliance into standby mode or into sleep
mode.
App Store
The appliance will automatically switch into sleep
mode when within 45 seconds after switching on no
cleaning mode has been activated.
• AUTO
The appliance is operating in "Systematic" mode. For
an optimal cleaning procedure of the room, the appliance
uses a navigation system that is controlled via a gyro-
scope. If the room conditions allow for it, the appliance
will clean the room in zigzag mode.
• HOME
When you press this button, the appliance will stop op-
erating and start searching for the charging station. The
display will show
The appliance moves forward, to the right, backwards
and to the left.
• OK
For example, when setting the time manually, you con-
firm the desired input.
The appliance is working in "Corner" mode. Place the
appliance close to a wall and activate the mode with the
corresponding button.
Turns the "Full Go" mode on or off. When the mode is
activated, FULL GO will appear at the top of the display.
Once the rechargeable battery is fully charged the appli-
ance starts cleaning automatically.
Make sure the main switch is set to the position.
Otherwise, the appliance will only drive down from the
charging station and then switches itself off.
The appliance is operating in "Spot" mode. Place the
appliance in the area that is to be cleaned. It then drives
from the centre of the area in an ever-growing circle.

Operation

NOTE:
.
/
/
/
NOTE:
10.07.19

Publicidad

Tabla de contenido
loading

Tabla de contenido