Before Using The Appliance; Putting Into Service; Inserting Batteries Into The Remote Control; Setting Up The Charging Station - Profi Care PC-BSR 3043 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 32
Depending on the condition of the step (colour scheme,
design, etc.), it may happen that the sensors can still not
detect the landing. Especially near a stairway, please do
not leave the appliance unattended.

Before Using the Appliance

• Clear the floor of any objects lying around that could
obstruct the side brushes, get caught in the nozzle or
stop the appliance from cleaning.
• Remove any objects that could be knocked over (such
as vases, small lamps, decorative items, etc.).
• Make sure that no cables, cords or fringes, e.g. of
curtains, table cloths or carpets can be accessed. If nec-
essary, fold the edges with its fringes under the carpet.
The appliance may otherwise get entangled in it.

Putting into Service

Inserting Batteries into the Remote Control

(Batteries are not included in the scope of delivery)
1. Open the battery compartment cover on the back of the
remote control.
2. Insert 2 batteries of type R03 "AAA" 1.5 V, observing
the correct polarity (see markings on the bottom of the
compartment)!
3. Close the battery compartment cover.
WARNING:
Do not expose batteries to excessive heat such as sun-
light, fire or similar. There is a risk of explosion!
CAUTION:
• Batteries may leak and lose battery acid. Remove the
batteries if the remote control is not being used for an
extended period of time.
• Different battery types or new and used batteries must
not be used together.
• Do not dispose of batteries along with domestic waste.
Return used batteries to the relevant collection facilities
or your retailer.

Setting up the Charging Station

1. Place the charging station close to a wall. Make sure
there is a wall outlet nearby.
NOTE:
You may use the adhesive strips supplied to fix the
charging station to the floor.
2. Make sure there are no objects within 2 meters in front
and 1 meter to the right and left of the charging station.
These could interfere with the appliance while it is
searching for the charging station.
3. Insert the connection of the power supply into the socket
of the charging station.
PC-BSR3043_IM
4. Plug the power adapter into a properly installed shock-
proof socket. The indicator light of the charging station
will light up.
5. Route the cable of the power adapter in such a way that
the appliance can not get caught in it.

Charging the Battery

Before you can use the appliance, you must first charge the
integrated rechargeable battery.
• Place the appliance with the charging surfaces onto the
charging contacts of the charging station. The display will
then show
.
or
• Set the main switch to the button on the remote control
or
on the appliance. The appliance will start searching
for the charging station. The first time, this may take
a little longer. The display will show
appliance has docked on to the charging station, the
message
appears in the display.
The progress of the charging process can be identified by
the flashing bars. When the rechargeable battery is fully
charged, all charging bars in the display will light up. In
addition, the message
• After a maximum of 6 hours or as soon as the indicator
light stays on permanently, the charging process needs
to be stopped.
CAUTION:
• Route the cable of the power adapter in such a way
that nobody can trip over it.
• Do not charge the rechargeable battery unsupervised.
NOTE:
• When the capacity of the rechargeable battery is get-
ting low, the appliance will automatically start searching
for the charging station. The display will then show the
message
and the last bar of the battery status
indicator starts flashing.
• When the appliance does not find the charging station
until the rechargeable battery is fully discharged, you
will hear several beeps. The display briefly shows the
message
and the appliance will switch off by
itself.
• Even when switched off, the rechargeable battery
discharges continuously. If the appliance is out of use
for a longer period of time, charge the rechargeable
battery at least once every 4 to 6 weeks.
• Alternatively, you may also charge the appliance by
connecting the plug of the power adapter directly to the
socket (5).
. Once the
appears in the display.
53
10.07.19

Publicidad

Tabla de contenido
loading

Tabla de contenido