Loading Staples; Stapler Operation - Hitachi N 5008AB Manual De Instrucciones

LOADING STAPLES

● When loading staples into Stapler,
1) do not pull trigger;
2) do not depress push lever; and
3) keep Stapler pointed downward.
(1) Pull the staple feeder back until it latches.
(2) Place the staple strip over the staple
guide.
Make sure that the staple strip slides
freely on the staple guide.
(3) Press the feeder stop and slide the staple
feeder forward until it contacts the staple
strip.
The Stapler is now ready to operate.

STAPLER OPERATION

Read section titled "SAFETY"(pages 4 – 6).
● Never point Stapler toward yourself or anyone else.
● Never carry with finger on trigger.
Remove finger from trigger when not driving staples.
● Never place your hands or feet closer than 8 inches (200 mm) from
firing head when using.
● Do not drive staples on top of other staples or with Stapler at too
steep of an angle; staples can ricochet and hurt someone.
● Do not drive staples into thin boards or near corners and edges of
workpiece. Staples can be driven through or away from workpiece
and hit someone.
WARNING
Staple
DANGER
● Always wear eye protector.
WARNING
— 15 —
English
Feeder
Stop
Staple
Feeder
Staple Guide