I
Cape and cleaning
Control panel
Clean with a soft, damp cloth. Do not use abrasive substances.
Do not spray cleaners directly on the panel.
The control panel finish may be damaged by some laundry pre-treatment
soil and stain remover products.
Apply such products away from your dryer and wipe up any spills or overspray immediately.
Tumbler
Remove any stains caused by crayon, ink, or fabric dye (from new items such as towels orleans)
with an all-
purpose cleaner.
Tumble old towels or rags to remove any remaining
stain or cleaning substance.
Once these steps are followed,
stains may still be visible, but should not transfer to subsequent
loads.
Stainless steel tumbler
To clean the stainless steel tumbler, use a damp cloth with a mild, non-abrasive
cleaner suitable for stainless steel
surfaces.
Remove the cleaner residue and dry with a clean cloth.
DrLjer exterior
Clean with a soft, damp cloth. Do not use abrasive substances.
Protect the surface from sharp objects.
Do not place any heavy or sharp objects or a detergent
box on the dryer. Keep them on the purchased pedestal or
in a separate storage box. This may scratch or damage the top cover of the dryer.
Since the entire dryer has a high-gloss finish, the surface can be scratched or darnaged.
Avoid scratching or damaging the surface when using the dryer.
DrLjer exhaust sLjstem
Should be inspected
and cleaned yearly to maintain optimum
performance.
The outside exhaust hood should be cleaned more frequently
to ensure proper operation.
Clean the lint filter
After each load.
To shorten drying time.
To operate more energy efficiently.
Do not operate your dryer without
the lint filter in place.
English-
31
DV425000
DC68-O3381Aindd
31
2013-12-19
D_
1:07:16